Tungsten Recycling: What USD 3,185 APT Means for a USD 2.66 Billion Scrap Market

Executive summary. For decades, a worn carbide drill bit was a minor credit on a machine shop's scrap invoice. In 2026 it is a strategic feedstock. China placed tungsten products under export controls in February 2025, Western prices for ammonium paratungstate, the benchmark intermediate, were reported at USD 3,185 per metric ton unit in April 2026, up 350 percent since the start of the year, and a US defense sourcing rule due on 1 January 2027 bars contractors from tungsten produced in China, Russia, Iran or North Korea. Strategic Revenue Insights estimates the global tungsten-based materials recycling market at USD 1.35 billion in 2025, rising to USD 2.66 billion by 2035 at a 7.0 percent compound annual growth rate. Recycling is moving from a side stream to a core source of supply for tool makers and alloy producers outside China. This article sets out five lessons from the recyclers and tool makers moving first, with takeaways for strategy, operations, technology, compliance and revenue.
The structure of the market explains where value sits. Strategic Revenue Insights' Tungsten-Based Materials Recycling Market research finds that tungsten carbide scrap holds 58.00 percent of 2025 value, that the zinc process leads recycling routes at 32.00 percent while hydrometallurgical recovery grows fastest at 8.2 percent a year, that cutting tools supply 46.00 percent of feedstock, that cemented carbide manufacturing takes 55.00 percent of output while aerospace and defense grows fastest at 7.9 percent, and that Asia Pacific is the largest region at 46.00 percent. The research credits tungsten supply security with 2.0 percentage points of annual growth, cemented carbide demand with 1.7 points, critical raw material policy with 1.5 points and strong tungsten prices with 1.3 points, while scrap collection and sorting difficulties remove 0.9 points and price volatility removes 0.6 points.
The price signal is unusually strong. Industry trackers report that the gap between Chinese domestic and Western prices widened through 2026, with Western APT trading far above material inside China. A scrap stream that was once valued on yield and freight is now valued on security of supply, and the companies that control collection are the ones setting terms.
Why the Tungsten Recycling Market Is Entering a New Phase
Three structural forces are converging.
Mined supply is concentrated and now controlled. Primary tungsten comes from a small number of countries, with China dominant. Since 4 February 2025, Chinese exports of ammonium paratungstate, tungsten oxides, tungsten carbide and certain other products have required licences from the Ministry of Commerce. SRI's research names supply security as the largest driver at 2.0 points, because recycled tungsten gives manufacturers in Europe, North America and Japan a domestic source of the metal. The same pattern is reshaping rare earth magnet supply chains.
Defense rules are tightening. The US Defense Federal Acquisition Regulation Supplement clause 252.225-7052 takes full effect on 1 January 2027 and extends restrictions on tungsten from covered countries across the production chain. Industry advisers have noted that recycled material whose original feedstock came from a covered country may not become compliant simply by passing through a recycler, which makes traceability as valuable as tonnage. Aerospace and defense is the fastest growing end use at 7.9 percent in SRI's research, and the munitions build-up described in the howitzer restocking cycle depends on secure hard-metal supply.
Prices make collection pay. Strong tungsten prices add 1.3 points of growth in SRI's model because they make collection and processing profitable. When APT trades several times above its pre-control level, scrap that used to sit in drawers and bins is worth gathering from thousands of small workshops.
These forces explain SRI's forecast of a market that roughly doubles between 2025 and 2035, with growth concentrated in carbide scrap, hydrometallurgical recovery, aerospace and defense output and Asia Pacific.

Five Lessons From the Companies Moving First
The tool makers, powder producers and independent processors turning tungsten scrap into secure supply share a recognisable pattern. We have distilled it into five lessons, each followed by a takeaway for a specific leadership function.
Lesson 1: Feed, Not Furnaces, Is the Scarce Asset
The first lesson is about collection. SRI's research is direct: companies that control collection networks hold the strongest position, because feed, not processing capacity, is the scarce input. Cutting tools supply 46.00 percent of recycling feedstock, worth USD 621.00 million in 2025, mining and drilling tools 24.00 percent, wear parts 19.00 percent and electronics and lighting 11.00 percent.
The difficulty is fragmentation. Machine shops, automotive plants and aerospace suppliers each generate small quantities of worn inserts, drills and end mills, so logistics costs are high and material often goes to the nearest dealer. SRI's research names scrap collection and sorting as the largest restraint at 0.9 points, because mixed grades, coatings and contamination lower yields and processors without stable feed run below capacity.
The companies moving first treat collection as a customer service. They offer credits, containers, pickup schedules and fast payment, and they sort and assay scrap at the point of collection so that customers see the value of what they return.
"In tungsten recycling, the furnace is the easy part. The hard part is getting thousands of small workshops to send their worn tools to you rather than to the next dealer."
Takeaway on strategy. Invest in collection before capacity. Build pickup networks, return credits and sorting at source, sign supply agreements with large tool users and scrap dealers, and price scrap transparently so that customers trust the assay. Treat each collection relationship as a long-term supply contract.
Lesson 2: Tool Makers Close the Loop
The second lesson is about integration. Kennametal, which SRI estimates at 7.0 percent of the market, runs scrap return and reclaim programmes that recover carbide from used cutting and mining tools. Sandvik, at 6.5 percent, recycles carbide from its tools and customers through zinc and chemical routes into new powder. Global Tungsten and Powders leads at an estimated 8.0 percent by converting carbide scrap and other secondary material into powders for cemented carbide makers.
A closed loop gives a tool maker three advantages at once. It secures feedstock at a known cost, it gives customers a credit that ties them to the next purchase, and it lets the company document the origin of recycled content, which matters for defense buyers. Tool makers have the strongest access to scrap because they collect from their own customers, and SRI expects concentration to rise slowly as they expand those loops.
Independent processors compete differently: on recovery yield, speed of payment and the ability to handle difficult scrap that tool makers do not want. Chinese groups such as Xiamen Tungsten and Zhuzhou Cemented Carbide Group compete on scale and integration with mining and powder plants.
Takeaway on operations and partnerships. If you make carbide tools, run your own return programme and link scrap credits to new tool sales. If you are an independent processor, partner with tool distributors for feed, specialise in difficult grades, and compete on payment speed and yield. Either way, document the origin of every lot.
Lesson 3: Hydrometallurgy Captures What Older Routes Miss
The third lesson is about technology. The zinc process leads at 32.00 percent of 2025 value by breaking down hard carbide into reusable powder, but it grows at only 6.3 percent. Hydrometallurgical recovery, at 29.00 percent, grows fastest at 8.2 percent because it can dissolve tungsten from fines, grinding sludge, filter cake and mixed scrap that older routes waste.
The material shift supports the process shift. Tungsten chemicals and sludge hold 13.00 percent of material value and grow at 7.2 percent, from USD 175.50 million to USD 350.49 million, as falling disposal options push generators to sell residues rather than dump them. Carbide scrap remains the anchor at USD 783.00 million, rising to USD 1.58 billion, but the marginal tonne of new supply increasingly comes from streams that need chemistry rather than zinc.
SRI's view is that the best positioned suppliers will combine strong carbide collection with hydrometallurgical capability for fines and sludge. Those dependent on one process or one low-grade end use will grow below the market rate. The parallel in battery metals is clear, where direct lithium extraction is changing how brine is processed.
"The next tonne of tungsten supply will not come from a new mine in the West. It will come from sludge, fines and mixed scrap that nobody bothered to recover before."
Takeaway on technology. Add hydrometallurgical capacity alongside zinc and direct reuse. Target grinding sludge, filter cake and mixed scrap, invest in purification to reach high-purity intermediates, and use process flexibility to buy the feed that single-route competitors cannot use.
Lesson 4: Traceability Becomes a Product Feature
The fourth lesson is about compliance. Aerospace and defense takes 11.00 percent of recycled output in SRI's research and grows fastest at 7.9 percent, and it values recycled tungsten for its security of supply. From 2027, US defense buyers will need documented, compliant origin across the tungsten chain, and European and Japanese policy treats tungsten as a critical raw material with targets for recycled content. Critical raw material policy adds 1.5 points of growth in SRI's model.
That turns traceability from paperwork into a product feature. A processor aiming at aerospace needs certified, traceable high-purity output, while one serving steel makers can accept lower grades at lower prices, SRI's research notes. The recyclers moving first track every lot from collection to powder, segregate feed by origin, and offer certificates that buyers can show to regulators and customers.
Cross-border scrap trade is under more scrutiny for the same reason. Export rules can shift material between regions, and processors with plants close to tool users cut freight, reduce theft risk and keep material inside a compliant loop.
Takeaway on compliance and governance. Build lot-level traceability from collection to powder. Segregate feed by origin, certify output for aerospace, defense and electronics buyers, and align documentation with the US defense sourcing rule and European critical raw material policy before customers ask. Charge for certified material.
Lesson 5: Contracts Tame Price Swings
The fifth lesson is about risk. Price volatility removes 0.6 points of growth in SRI's model. When tungsten prices fall, scrap is worth less and dealers hold back material, which slows flows and hurts processor margins. When prices spike, as they did in 2025 and 2026, buyers scramble and dealers speculate. SRI's research notes that long-term contracts between tool makers and recyclers help smooth these swings.
The companies moving first price scrap against a published benchmark with agreed discounts for grade and contamination, sign multi-year offtakes for recycled powder with carbide makers, and hedge exposure where possible. That stability is what lets them invest in collection and hydrometallurgy through the cycle rather than only at the top.
The capabilities that decide who captures this demand are specific:
Collection networks that reach small workshops, mines and tool users.
Closed-loop return programmes linked to new tool sales.
Hydrometallurgical capacity for sludge, fines and mixed scrap.
Lot-level traceability and certification for defense and aerospace buyers.
Benchmark-linked scrap pricing and long-term offtake contracts.
Companies evaluating these competitive dynamics in greater detail can use SRI's Tungsten-Based Materials Recycling Market analysis to assess material, process, source, end-use and regional segments and the positioning of the leading recyclers and tool makers.

Takeaway on commercial risk. Price scrap against a benchmark with clear grade adjustments, sign multi-year offtakes for recycled powder, and keep enough contracted feed to run plants through price troughs. Use the current price spike to lock in collection relationships rather than spot margins.
Where the Opportunity Is Concentrating
Value is moving toward carbide scrap and residues, toward hydrometallurgy, toward aerospace and defense, and toward Asia Pacific.
By material, carbide scrap adds the most value, chemicals and sludge grow almost as fast, heavy alloys grow at 6.6 percent and metal scrap, already pure but limited in supply, grows slowest at 6.4 percent.
By process, hydrometallurgical recovery grows fastest, the zinc process remains the volume leader for carbide, and direct reuse serves grades that can be reground with minimal chemical change.
By source, cutting tools supply the most feed, while mining and drilling tools grow faster at 7.4 percent with drilling and construction activity.
By end use, cemented carbide manufacturing takes 55.00 percent of output and grows at 7.1 percent, steel and alloys take 21.00 percent, electronics 13.00 percent and aerospace and defense 11.00 percent.
By geography, Asia Pacific holds 46.00 percent of 2025 value, or USD 621.00 million, and grows fastest at 7.8 percent, because the largest carbide tool, electronics and mining activity is there. Europe holds 24.00 percent and North America 17.00 percent, both with mature tool markets and strong return programmes run by tool makers. Recycling is following the same path seen in lithium-ion battery recycling, where policy and price together keep material in regional loops.
At the Horizon: What to Watch Over the Next Three Years
The 2027 defense deadline. How US contractors document compliant tungsten supply from 1 January 2027, and how recycled material is treated, will decide how much premium certified Western scrap can command.
Export licence policy. Changes in China's licensing of tungsten exports, including the number of approved exporters, will move Western APT prices and the economics of collection.
New non-Chinese mine supply. Mines outside China entering production would narrow the price gap and test how much of the recycling premium is structural rather than cyclical.
"The next phase of competition in tungsten will not be decided at the mine alone. It will be decided by who collects the scrap, proves where it came from and turns it back into powder at a stable price."
The Strategic Revenue Opportunity
For tool makers, the task is to close the loop with customers and secure feedstock. For independent recyclers, the priority is collection, hydrometallurgical capability and certification. For carbide, alloy and defense manufacturers, the opportunity is to lock in recycled supply under long-term contracts. For investors, the signal is a market that doubles in value as policy, prices and defense demand turn scrap into strategic supply, set against collection costs and price swings.
Market intelligence turns these questions into decisions. Segment-level sizing shows where spend is concentrating across material, process, source and end use, competitive benchmarking shows where tool makers and processors are strong, and regional analysis shows where policy and tool consumption will pull demand first. This is the path from market signals to strategic insight to revenue impact.
Takeaway on revenue. Treat the tungsten recycling market as four revenue pools with different buyers: carbide powder sold to tool makers, certified high-purity material sold to aerospace, defense and electronics, lower-grade material sold to steel and alloy producers, and collection services sold to tool users as credits and logistics. Each needs its own pricing, certification and contract model. Enter where collection is already strong.
The Next Leg: Preparing for the Journey Ahead
The defining shift in tungsten recycling is that scrap has become supply. Export controls, record prices and defense sourcing rules have changed the value of a worn insert from a disposal credit into a strategic input. The companies moving first are not the ones with the largest furnaces; they are the ones that control collection, close the loop with tool users, recover tungsten from residues, prove origin and contract through the cycle.
The next three years will decide which recyclers and tool makers become the secure tungsten source for manufacturers outside China. Decision-makers should invest in collection and hydrometallurgy, build traceability and sign long-term offtakes. Companies evaluating growth opportunities in this market can use Strategic Revenue Insights' Tungsten-Based Materials Recycling Market report to assess market size, competitive dynamics, regional opportunities and strategic growth priorities.
Sources: Strategic Revenue Insights, Tungsten-Based Materials Recycling Market report (2026); China Ministry of Commerce and General Administration of Customs, tungsten export control announcement (2025); Industrial Info Resources citing the Oregon Group, APT price reporting (2026); US Department of Defense, DFARS 252.225-7052 tungsten sourcing clause (2027 effective date).
Frequently Asked Questions
How big is the tungsten recycling market?
Strategic Revenue Insights values the global tungsten-based materials recycling market at USD 1.35 billion in 2025 and forecasts USD 2.66 billion by 2035, a 7.0 percent compound annual growth rate. Asia Pacific is the largest region with 46.00 percent of 2025 value and also the fastest growing at 7.8 percent.
What is driving tungsten recycling growth?
According to Strategic Revenue Insights, tungsten supply security adds 2.0 percentage points a year to growth, cemented carbide demand adds 1.7 points, critical raw material policy adds 1.5 points and strong prices add 1.3 points. Scrap collection difficulties remove 0.9 points and price volatility removes 0.6 points.
Which material and process lead tungsten recycling?
Tungsten carbide scrap holds 58.00 percent of 2025 value, according to Strategic Revenue Insights, because cemented carbide is the main use of tungsten. The zinc process leads recycling routes at 32.00 percent, while hydrometallurgical recovery grows fastest at 8.2 percent by recovering tungsten from sludge and fines.
Why have tungsten prices risen so sharply?
China placed tungsten products such as ammonium paratungstate and tungsten carbide under export licensing from February 2025. Western APT prices were reported at USD 3,185 per metric ton unit in April 2026, up 350 percent since the start of that year, and a US defense sourcing rule takes effect in January 2027.
About the authors: This article was prepared by the Strategic Revenue Insights research team, which combines market intelligence, competitive analysis and strategic advisory for growth-stage, mid-market and enterprise organisations across the chemicals and materials sector.
Sector analyst: Rohan Mehta, Principal Strategist, Finance, Chemicals and Market Risk. Our market estimates combine primary research (interviews, surveys and expert panels) with secondary data (industry reports, databases and public disclosures); read more about how Strategic Revenue Insights works. To discuss this market with our analysts, contact our team.




Comments